ASIEN • BA 2 609 140 167 • GST 54 ...E • OSW 09/01
English - 1
1
On/Off switch
2
Stroke rate selection thumbwheel
(GST 54 E)
3
Locking button
4
Mains cable
5
Allen key
6
Base plate
7
Guide roller
8
Saw blade*
9
Stroke rod
10
Contact protector
11
Screwdriver
12
Clamping screw
13
Scale
14
Positioning pin/marking
15
Screw (2x)
16
Protractor**
17
Thread bore
18
Splintering protector
19
Circle Cutter/Parallel Guide*
* Optional Extra
** Commercially available (not included in the delivered
items)
*
Not all the illustrated or described accessories are in-
cluded as standard delivery.
Working safely with this ma-
chine is possible only when the
operating and safety information
is read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served. Before using for the first
time, ask for a practical demon-
stration.
If the cable is damaged or cut
through while working, do not touch
the cable and pull the plug immedi-
ately. Never use the machine with a
damaged cable.
Wear safety glasses.
When working, never place a hand
or fingers in front of the saw blade.
■
Don’t work with materials containing asbestos.
■
Connect machines used outdoors via a resid-
ual current device (RCD) with a maximum trig-
gering current of 30 mA. Use only extension
cables that are intended for outdoor use.
■
Insert the power plug only when the machine
is switched off.
Tool Specifications
Jigsaw GST 54 GST 54 E
Part number 0 601 58A 0.. 0 601 58A 7..
Rated power [W] 400 400
Output power [W] 230 230
Stroke rate at no load [spm] 3000 500–3000
Stroke [mm] 18 18
Stroke rate selection – •
Cutting performance (max.):
– in wood [mm] 54 54
– in plastic [mm] 15 15
– in aluminum [mm] 12 12
– in non-alloyed steel [mm] 3 3
Bevel cuts (left/right) [°] 0–45 0–45
Weight (without optional extras) approx. [kg] 1.7 1.7
Safety class
/ II / II
Operating Controls For Your Safety
GST 54/E.book Seite 1 Mittwoch, 12. September 2001 3:42 15
6 • 2 609 140 167 • TMS • 05.09.01