English | 53
Bosch Power Tools 1 609 929 U05 | (9.6.09)
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Symbol Meaning
f Do not direct the laser beam at persons or animals and do
not stare into the laser beam yourself, not even from a dis-
tance. This power tool produces laser class 2 laser radiation
according to EN 60825-1. This can lead to persons being
blinded.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Elec-
trical and Electronic Equipment and its implementation into na-
tional right, power tools that are no longer usable must be col-
lected separately and disposed of in an environmentally correct
manner.
f Wear safety goggles.
f Wear ear protectors. Exposure to noise can cause hearing
loss.
f Wear a dust respirator.
f Danger area! Keep hands, fingers or arms away from this
area.
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reducers
or adapters.
When changing the saw blade, pay attention that the kerf width
is not less than 2.5 mm and the blade thickness not greater
than 2.5 mm. Otherwise, there is danger that the riving knife
(2.5 mm) becomes wedged in the workpiece.
When operating the combination saw as a table saw, the maxi-
mum workpiece height is 51 mm.
Ø max. 305mm
Ø 30mm
Ø min. 300mm
2.5mm
51mm
OBJ_BUCH-302-005.book Page 53 Tuesday, June 9, 2009 2:19 PM
To Next Page
Loading...
