To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWH-635-ES-N and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | GWH-635-ES-N |
| Category | Water Heater |
| Language | English |
Describes the key parts, safety features, materials, and functions of the water heater.
Provides detailed technical specifications including capacity, output, temperature control, gas requirements, and water connections.
Details the physical dimensions of the unit and required clearances for safe installation and operation.
Outlines essential safety guidelines and best practices for operating the water heater.
Provides guidance on selecting the optimal and safest location for heater installation.
Specifies minimum distances required around the appliance for safe installation.
Instructions and considerations for securely mounting the water heater on a wall.
Explains the necessity and methods for providing adequate combustion air for the appliance.
Covers essential information and warnings regarding the proper venting of exhaust gases.
Details different methods for venting the appliance, including room-sealed and open combustion.
Illustrates and specifies recommended locations for vent terminators based on safety distances.
Guides on supporting vent systems and the correct installation of condensate traps.
Provides instructions and requirements for connecting the gas supply to the water heater.
Offers guidance and charts for correctly sizing gas supply lines based on BTU load and pipe type.
Explains how to measure and verify adequate gas pressure for optimal performance.
Details the procedure for adjusting the appliance for operation at high altitudes.
Instructions for connecting the cold and hot water lines to the appliance.
Guides on the proper installation and connection of the pressure relief valve.
Provides safety warnings and instructions for making electrical connections to the heater.
Step-by-step guide on how to prepare and start the water heater for operation.
Crucial safety warnings and instructions to follow before operating the appliance.
Instructions on how to turn the appliance on and off using the main switch.
Guides on how to adjust and set the desired hot water temperature output.
Explains how the desired temperature is adjusted and modulated by the electronic control.
Procedure for pairing and registering a wireless remote control with the appliance.
Describes the normal operation sequence when a hot water tap is opened.
Information on when and how to use the reset button to clear errors or reset the unit.
Explains the functionality and use of the program button for temperature settings.
Describes the locked condition and how it can be unlocked, typically related to remote control use.
Step-by-step instructions for safely removing the front cover for inspection or service.
Lists essential components and systems requiring annual inspection by a qualified technician.
Details the process of flushing the heat exchanger to remove mineral build-up and maintain efficiency.
Provides an overview of common water-flow related problems affecting heater performance.
Lists potential causes and solutions for the burner failing to ignite when hot water is used.
Explains why the water might be too hot and how to adjust settings or diagnose issues.
Covers reasons for insufficient hot water temperature and potential solutions.
Discusses issues related to low water flow or pressure affecting heater operation.
Addresses temperature instability and unit deactivation due to water line issues.
Presents the wiring diagram and identifies key electrical components of the appliance.
Illustrates the operational logic and flow of the water heater's control system.
Provides a visual diagram identifying the main internal parts of the appliance.
A detailed exploded view diagram showing all the individual components of the unit.
A comprehensive list of all parts with their descriptions and reference numbers for ordering.
Instructions for adjusting the CO2 levels for optimal combustion and emissions.
Identifies the port used for inserting a CO2 analyzer to measure exhaust gas levels.
Guides on selecting the correct mode (P1/P2) for CO2 adjustment based on gas flow.
Offers tips and methods for conserving water while using the appliance.
Outlines the basic terms and conditions of the manufacturer's warranty.
Specifies the warranty period and conditions for the heat exchanger.
Lists conditions and situations under which the warranty is void or does not apply.
Details the warranty coverage and replacement terms for parts other than the heat exchanger.
Clarifies that labor costs for service or replacement are not covered by the warranty.
Provides instructions on how to submit a warranty claim and contact customer support.
Covers limitations of liability and legal rights related to the warranty.
