To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS 22-180 LV Professional and is the answer not in the manual?
General| Rated input power | 2200 W |
|---|---|
| No-load speed | 8500 rpm |
| Disc diameter | 180 mm |
| Weight | 5.2 kg |
| Vibration control | Yes |
| Rubber sanding plate diameter | 180 mm |
| Spindle thread | M14 |
Read all safety warnings and instructions. Failure may result in electric shock, fire, or serious injury.
This power tool is intended for grinding, sanding, wire brushing or cut-off operations. Read all safety warnings and instructions.
Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory.
Use only recommended wheel types and guards. Ensure proper mounting and guard positioning.
Avoid jamming the cut-off wheel or applying excessive pressure. Do not make excessive depth of cut.
The machine is intended for cutting, roughing and brushing of metal and stone materials without the use of water.
Before any work on the machine, pull the mains plug. Mount protective guards correctly.
Ensure correct mounting of grinding and cutting protection guards for safety.
Ensure correct dimensions and fit for grinding/cutting discs. Pay attention to direction of rotation.
The kickback stop feature interrupts power if speed drops suddenly due to jamming.
