To Next PageTo Next Page
Need help?Do you have a question about the Bosch GWS Professional 22-180 JH and is the answer not in the manual?
General| No-load Speed | 8500 rpm |
|---|---|
| Disc Diameter | 180 mm |
| Weight | 5.2 kg |
| Spindle Thread | M14 |
| Power Input | 2200 W |
General safety instructions applicable to all power tools.
Guidelines for maintaining a safe and well-lit work environment.
Precautions related to power supply, plugs, and cords.
Advice on staying alert, using PPE, and proper attire.
Instructions on proper usage, maintenance, and storage.
Safety advice specific to angle grinders and accessories.
Safety guidelines for common angle grinder applications.
Explanation and prevention of sudden tool reactions (kickback).
Specific safety measures for grinding and cutting tasks.
Safety advice for sanding applications.
Safety advice for wire brushing applications.
Further safety precautions to be observed.
Overview of the tool's functions and operating instructions.
Defines the proper applications and limitations of the machine.
Identifies and numbers the various parts of the machine.
Details on noise levels and vibration emissions.
Provides detailed technical specifications for different models.
Statement of compliance with EU directives.
Steps for installing safety guards and accessories.
Instructions for attaching the grinding protection guard.
Instructions for attaching the cutting protection guard.
Guidance on fitting and using the auxiliary handle.
Instructions for mounting the hand guard.
How to mount grinding and cutting discs correctly.
Instructions for mounting a flap disc.
Steps for mounting the rubber sanding plate.
How to mount cup or disc brushes.
Instructions for mounting a grinding cup.
Details on using the SDS-clic quick-clamping nut.
Table of compatible tools and their specifications.
How to rotate the machine head for different applications.
Guidance on dust extraction during operation.
How to properly start the machine.
Instructions for turning the power tool on and off.
Explanation of the feature preventing auto-restart.
Information about the soft-start function.
Techniques for effective rough grinding.
How to use flap discs for various surfaces.
Guidelines for cutting metal safely and effectively.
Instructions for cutting stone with dust extraction.
Steps for keeping the machine clean and in good condition.
Contact details and procedures for service and support.
