Bosch GWS Professional 5-115 - Technical Data and Assembly Instructions; Technical Data for GWS E Angle Grinder Models; Assembly: Mounting Protective Devices; Auxiliary Handle Installation Guide

1 609 929 L34 | (24.7.08) Bosch Power Tools
12 | English
Assembly
Mounting the Protective Devices
f Before any work on the machine itself, pull
the mains plug.
Protection Guard for Grinding
Place the protection guard 8 on the spindle col-
lar. Adjust the position of the protection guard 8
to the requirements of the operation. Lock the
protection guard 8 tightening the locking screw 7
with an allen key 3.
f Adjust the protection guard 8 in such a man-
ner that sparking is prevented in the direc-
tion of the operator.
Note: The encoding keys on the protection guard
8 ensure that only a protection guard that fits the
machine type can be mounted.
Protection Guard for Cutting
f For cutting metal, always work with the pro-
tection guard for cutting 13.
f For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 20.
The protection guard for cutting 13 is mounted in
the same manner as the protection guard for
sanding 8.
Auxiliary Handle
f Operate your machine only with the auxiliary
handle 5.
Screw the auxiliary handle 5 on the right or left of
the machine head depending on the working
method.
Angle Grinder GWS...
Professional
6-100 E 6-115 6-115 E 6-125 6-125 E
Article number
0 601 ... 375 7.. 375 0.. 375 5..
375 7..
375 9..
375 1.. 375 9..
Rated power input
W 670 670 670 670 670
Output power
W 400 400 400 400 400
Rated speed
min
-1
11000 11000 11000 11000 11000
Speed control adjustment
min
-1
2800
– 11000
– 2800
– 11000
– 2800
– 11000
Grinding disc diameter, max.
mm 100 115 115 125 125
Thread of grinder spindle
M 10 M 14 M 14 M 14 M 14
Thread length (max.) of grinder
spindle
mm 17 22 22 22 22
Speed preselection
z – z – z
Weight according to
EPTA-Procedure 01/2003
kg 1.8 1.9 1.9 1.9 1.9
Protection class
/II /II /II /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-704-003.book Page 12 Thursday, July 24, 2008 1:02 PM