OVEN REGULATION PARAMETERS FOR COOK MODES
Elements used during Preheat Operation
On-Time
(1)
(in seconds)
Serial
#
Cooking Function
Conv
Fan
Speed
Default
Temperature
°C / °F
Full-
power
period
in seconds
Lower Upper Ring Additional
1 Bake
(3)
- 175 / 350 60 40 12 - -
Preheat cycle Full
2
Convection
Bake Normal cook cycle Reduced
160 / 325 30 - - 30 -
3
Dehydrate – Low Power Convect
Bake
Full 60 / 140 30 - - 30 -
Preheat cycle Full
4
Convection
Roast
Normal cook cycle Reduced
160 / 325 60 40 12 - -
5 Broil - Level 3 60 -
LEVEL 1 = 11sec.
LEVEL 2 = 21sec.
LEVEL 3 = 31 sec.
LEVEL 4 = 42sec.
LEVEL 5 = 52sec.
- -
Preheat cycle Full
6
Convection
Broil
Normal cook cycle Reduced
245 / 475 60 - 52 - -
7 Self-Clean Full 60 12 43 - 60
(2)
8 Warming – Low Power Bake
(3)
- 75 / 170 60 40 - - -
Preheat cycle Full 175 / 350 60 60 60
9
Fast Preheat
Bake
Normal cook cycle - 175 / 350 60 40 12 - -
Preheat cycle Full 160 / 325 60 60 60
10
Fast Preheat
Convection
Bake
Normal cook cycle Reduced 160 / 325 30 - - 30 -
NOTE 1: The control will follow the on time ratio for the particular cookmode when cooking.
NOTE 2: The additional element in a Self-Clean will only be used when the Voltage service to the oven is 208VAC.
NOTE 3: For Bake and Warming modes, period and element times are divided in half for control temperatures lower than 250°F.
NOTE 4: In any cooking mode, the associated element icon and fan will always be ON in the display when the cooking mode is active. In
Fast Preheat Bake, the icon will switch to bake state at steady conditions.
To Next Page
Loading...
