Cleaning the rails Removing
You can remove the rails for cleaning.
1. At the front, press the rails up and detach the
front clip.
2. At the back, pull the rails forward and take it off.
Clean the rails using washing-up liquid and pan
scrapers or brushes.
Replacing
The rails fit on the left and right side.
When installing the rails, do not twist them,
otherwise the shelf positions for the accessories
will not correspond.
For the main oven: The indentation (a) must
always be at the bottom.
For the mini oven: The extension (a) must
always be at the top.
1. At the back, put the rails in as far as it goes.
2. Press the rails backwards until it clicks into place
in the front.
30
To Next Page
Loading...
