UNDERCOUNTER INSTALLATION, SINGLE
1/4 min. spacing if decorative
filler panels are used.
Note: Decorative inserts must
maintain minimum spacing as shown.
Note: Decorative inserts must
maintain minimum spacing as shown.
Oven electrical supply:
Locate junction box in
adjacent cabinet or below
bottom support surface.
Bottom support surface must
be solid, level and able to
support at least of 150 lbs.
25-3/8" opening width
toe space area
1/4" min. distance
between oven door
frame and adjacent
doors or drawer fronts.
26-5/8" width of oven door frame
36" countertop height
23" opening height
4-1/2"
min.
Secure oven to cabinet using the screws
provided. Screws should be inserted through the
mounting holes in the positions indicated in the
frame (open door to see frame and mounting
holes). Do not overtighten screws.
114206-2
Refer to and follow Notes and Warning listed under Wall Installation, Single Oven (facing page)
5
To Next Page
Loading...
