To Next PageTo Next Page
Need help?Do you have a question about the Bosch HD19-2 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 120 V |
| No-load speed | 0-1, 000 / 0-3, 000 RPM |
| Chuck Size | 13 mm |
| Chuck capacity | 1/2 inch |
| Drill diameter in wood | 1-1/2 inches |
| Drill diameter in steel | 1/2 inch |
General safety for the work environment and electrical connections to prevent accidents.
Guidelines for user alertness, protective equipment, and preventing accidental starts.
Proper usage practices, avoiding misuse, and ensuring tool functionality for safe operation.
Guidelines for having the power tool serviced by qualified personnel to ensure safety.
Procedures for safe handling, securing materials, and avoiding hazards during drilling.
Instructions on proper bit insertion, managing reaction torque, and hand placement.
Precautions for extension cords, AC/DC use, handle care, maintenance, and cleaning agents.
Warnings about hazardous chemicals in dust from construction activities and exposure reduction.
Explanation of various symbols used on the tool for voltage, current, speed, and operation.
Meanings of safety warning, manual reading, eye protection, and battery recycling symbols.
Details on model number, no-load speeds, and impact rates for the tool.
Specifications for the maximum size of holes drillable in various materials.
Step-by-step guide for properly inserting drill bits into the chuck and tightening.
Instructions for attaching and adjusting the auxiliary handle and depth gauge for control.
How to use the trigger switch for controlling speed and turning the tool on/off.
How to change the rotation direction and select between drill and hammer drill modes.
Guide to selecting the correct gear and locating the chuck key for convenience.
Tips for efficient drilling, managing pressure, and using the variable speed feature effectively.
Advice for drilling wood, metal, and masonry with appropriate techniques.
Recommendations for maintaining the tool's performance through lubrication and component checks.
Proper cleaning procedures and caution regarding cleaning agents that may damage plastic parts.
Guidance on choosing the correct size extension cord for safe and efficient tool operation.
Listing of standard equipment and optional accessories available for the tool.
Details on the warranty period, what is covered, limitations, and consumer rights.
