3.5 Removing the upper heating elements
1. Remove the housing.
2. Discharge the HV capacitor.
3. Unscrew the cooling fan assembly, and lift out.
4. Disconnect the magnetron and the H.V. transformer.
5. Unscrew and remove magnetron and H.V. transformer.
6. Disconnect the wiring above the upper heat protector assembly.
7. Unscrew the upper heat protector assembly from the cavity upper
plate, and lift out carefully.
7. Disconnect the heating elements.
8. Remove the hex nuts on the right side of cavity and on the upper of
cavity.
9. Lift out the upper heating elements from the cavity.
To Next Page
Loading...
