Parts Included
A
%
E F
C D
Location requirements
Installation dimensions
i 13%"
(349mm)
min.
You will find the installation hardware contained in packet
with the unit. Check to make sure you have all these
parts:
A Top mounting bolts:
Self-aligning machine screws 1/4"-28x31/4"
B
C
D
Toggle bolts - 3/1 6"x3"
Wall mounting hardware:
Toggle wings
Wood screws 1/4"x2"
E Power chord strap
F
G
Nylon grommet (for metal cabinets)
Exhaust adaptor
Not shown:
o Top cabinet template
o Mounting plate (attached to the back of the microwave
oven)
o Aluminum grease filters
o Charcoal filter (factory-fitted in the microwave oven)
min.12" (305mm)
max.14" (356mm)
min.66" _
(1676mm)_
........min. 16 1/2"
(419mm)
* min. 30"
(762mm)
For optimal performance and
reliability, the manufacturer
recommends 33"-36" clearance,
although the minimum allowable
clearance is noted 30".
To Next Page
Loading...
