28
Spin speed
The Spin Speed setting is based on your washer’s
normal spin speed. Adjusting this setting allows the
dryer’s displayed time to be as close as possible to the
actual drying time.
NOTICE: The spin speed is not the same as the rotation
speed of the dryer drum.
To change the dryer’s Spin Speed setting follow the
instructions below.
Activate adjustment mode
1.
Select Cotton Extra Dry on position 1.
The appliance is on.
2.
Touch and hold Start/Pause and turn the program
selector to the right (position 2). Release Start/Pause
button.
Adjustment mode is now activated and the default value
(1000 rpm) appears in the display.
Change spin speed
Press the Time dry or Finish in button to change the
setting (allowable values are between 600 and 1800 in
increments of 100).
Quit adjustment mode
Turn the program selector to Off position. The settings
were saved.
2II
To Next Page
Loading...
Need help?
General
