EasyManua.ls Logo

Bosch HRG6753 1A Series - User Manual

Bosch HRG6753 1A Series
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3FHJTUFS
ZPVS
OFXEFWJDFPO
.Z#PTDIOPXBOE
HFUGSFFCFOFGJUT
CPTDIIPNFDPN
XFMDPNF
[en] Instruction manual Built-in oven
Built-in oven
HRG6753.1A

Questions and Answers

  • K
    kvasquezSep 12, 2025
    What does 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' mean on my Bosch Kitchen Appliances?
    • H
      Heather MuellerSep 12, 2025
      If your Bosch Kitchen Appliance displays 'OVERLOAD SCALE' or 'UNDERLOAD SCALE', it means the measurement is outside the scale's range (-990 g to 5000 g). Do not add more than 5000 g or remove more than 990 g of ingredients.
  • L
    larry25Aug 25, 2025
    Why is the water not draining from my Bosch Washer/Dryer?
    • R
      Ricardo LeeAug 25, 2025
      The water might not be draining from your Bosch Washer/Dryer because the drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose to resolve this. Another possible reason is that the drain pipe or water drain hose is caught or jammed; ensure that they are not kinked or trapped. Also, check that the pump cap is fully screwed in, with the handle in a vertical position.
  • S
    silvadavidAug 25, 2025
    What to do if the Bosch Washer/Dryer programme does not start?
    • P
      Patrick McguireAug 26, 2025
      If the programme on your Bosch Washer/Dryer isn't starting, make sure that you have pressed the start button. Also, check that the door is fully closed and that the childproof lock is deactivated. Ensure that the 'Finish in' option is not activated and that no laundry is caught in the door.
  • R
    Rebecca FisherSep 23, 2025
    How to troubleshoot a Bosch Kitchen Appliance when nothing is shown on the display and the illuminated ring is off?
    • L
      Larry RussellSep 23, 2025
      If nothing is shown on the display and the illuminated ring is off, it means the appliance has no power supply. Check the power supply by plugging the mains plug into the mains.
  • L
    lisa26Sep 13, 2025
    What to do if my Bosch Kitchen Appliances shows 'OVERLOAD' or 'UNDERLOAD' when using SensorControl Plus?
    • R
      Rachel ParksSep 13, 2025
      If your Bosch Kitchen Appliance shows 'OVERLOAD' or 'UNDERLOAD' while using SensorControl Plus, it indicates that too much or too little of the ingredients was added for the selected program. Add ingredients according to the specified quantities.
  • M
    Matthew ThomasSep 18, 2025
    What to do if my Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE'?
    • N
      Nathan VelezSep 18, 2025
      If your Bosch Kitchen Appliance displays 'FOR SCALE STOP MACHINE', it means the scale is switched on while the appliance is running. To resolve this, switch the appliance off and wait until it stops before using the scale.
  • C
    Craig ValentineSep 5, 2025
    How to fix Home Connect if it is not working properly on my Bosch Washer/Dryer?
    • P
      Paul JamesSep 5, 2025
      If Home Connect is not working properly on your Bosch Washer/Dryer, it could be due to several reasons. If there is no connection to the home network, go to www.home-connect.com. If Wi-Fi is switched off, activate Wi-Fi on the appliance. If Wi-Fi is activated but a connection to your home network cannot be established, ensure that the home network is available and reconnect the appliance to the home network.
  • M
    Matthew CampbellSep 7, 2025
    What to do if my Bosch Kitchen Appliances switches off during use?
    • S
      Savannah WhiteSep 7, 2025
      If your Bosch Kitchen Appliance turns off during use, it could be due to several reasons. First, too much food may have been processed at once or for too long. To fix this, turn the rotary switch to 'y', disconnect the mains plug, reduce the processing quantity, and let the appliance cool down. Second, the swivel arm may have been opened. To resolve this, turn the rotary switch to 'y', press the release button, and push the swivel arm down until it locks. Finally, the bowl or bevel gear might be loose. To correct this, turn the rotary switch to 'y', disconnect the mains plug, tighten the bowl by turning it until it stops, and tighten the bevel gear, ensuring the locking lever is completely closed.
  • P
    philipshortSep 22, 2025
    Why won't the swivel arm on my Bosch Kitchen Appliance open?
    • F
      fernandomorrisSep 22, 2025
      The swivel arm on your Bosch Kitchen Appliance may not open because an accessory is fitted to the red rear drive. To open it, remove the accessory, press the release button, and then open the swivel arm.
  • J
    James WalkerAug 30, 2025
    Why is my Bosch Washer/Dryer water pressure low?
    • M
      Mr. Joshua DavisAug 30, 2025
      Low water pressure in your Bosch Washer/Dryer could be due to a few reasons. Try cleaning the water inflow filter. Also, make sure that the tap is turned on and that the water inlet hose is not kinked or jammed.

Bosch HRG6753 1A Series Specifications

General IconGeneral
Number of cavities1
Self-cleaningYes
Full glass inner doorYes
Electronic clockYes
Rapid heating-upYes
Halogen interior lightingYes
Childproof lockYes
Safety switch offYes
Residual heat indicatorYes
Start buttonYes
Door contact switchYes
Total connected load electric3.6 kW
Voltage220-240 V
Product TypeOven
Installation TypeBuilt-in
ColorStainless steel
Oven type / cooking methodElectric
Usable volume of cavity71 liters
Heating modesDefrost
Length of mains cable1.5 meters
Dimensions (HxWxD)595 x 594 x 548 mm
Power Consumption3600 W
Frequency50 Hz

Related product manuals