Bosch ICP-CC404 - Page 18

ICP-CC404 | User's Guide | 22.0 Glossary of Terms
Table 14: continued
Term Description
Silent Alarm Your installer can program zones for silent operation. When the zone programmed
for silent operation is violated during the armed period, your alarm system
communicates with the monitoring station without sounding the sirens.
STAY Mode 1 The system automatically isolates zones when you arm the system in STAY Mode 1.
Only your installer can program zones to be isolated automatically in this mode.
STAY Mode 2 The system automatically isolates zones when you arm the system in STAY Mode 2.
Only the Master Code holder can program zones to be isolated automatically in this
mode.
Telco Arm Sequence Telco arming automatically diverts your telephone number to another telephone
when the system is armed in AWAY Mode. In Australia, this feature is called “Call
Forward”.
Telco Disarm
Sequence
Telco disarming automatically calls the telephone exchange and does not forward
your telephone number.
Unsealed Refers to zone status. A zone is unsealed when a zone is violated. The
corresponding zone indicator lights on the codepad.
User Code The personal identification number an operator uses to arm and disarm the system.
Zones A monitored input used to activate an alarm when violated.