[ I ] 34 Fault
[ I ] 341 Ignore AC Fail
[ I ] 342 AC Fail Report Wait Time
[ I ] 343 Horn Speaker Fault Monitor
[ I ] 344 Phone Line Fault Indicator
[ I ] 345 Phone Line Fault Alarm on Armed
[ I ] 346 Phone Line Fault Alarm on Disarm
[ I ] 347 Lockout Phone Line Fail Alarm
[ U I ] 35 Wireless [ I ] 351 RF Receiver
[ I ] 352 Zone RFID And Input Option
[ U I ] 353 Keyfob RFID
[ I ] 354 Repeater RFID
[ I ] 355 RF Supervision Time
[ I ] 356 RF Jam Sensitivity
[ I ] 357 RF RECE Jam/Tamper Siren Alarm
[ I ] 358 RFKF Btn4 Arm In STAY1
[ I ] 359 RF Arm/Disarm Strobe Indicate
[ U I ] 36 System
Option
[ U I ] 361 Home Message
[ I ] 362 Factory Default Enable
[ I ] 363 Alarm Memory Reset On Disarm
[ I ] 364 STAY Indicator For Day Alarm
[ I ] 365 Digit 3 For Codepad Duress Alarm
[ I ] 366 Siren & Strobe Output In STAY
[ I ] 367 Speaker Beep Volume
Table 4.4: System Menu
Zone Menu
[ U I ] 4 Zone
[ I ] 41 Zone Config
[ I ] 42 Zone Allocate
[ U I ] 43 Zone Name
[ I ] 44 Day Alarm Zone
[ I ] 45 STAY2 Zone
[ I ] 46 EOL Resistor
[ I ] 47 Zone State Rpt
[ I ] 48 Swing Shutdown [ I ] 481 Siren Swing Shutdown Count
[ I ] 482 Dialer Swing Shutdown Count
[ I ] 49 Zone Option [ I ] 491 Silent Zone Tamper Alarm
[ I ] 492 Unseal Zone That Fail Monitor
[ I ] 493 Bosch Smart Lockout Enable
[ I ] 494 Zone Pulse Cnt Handover Enable
[ I ] 495 Handover Delay In Order
Table 4.5: Zone Menu
4.1.4
12 en | Operation with TEXT LCD Codepad Control Panel
2014.05 | 01 | F01U298028 User's Guide Bosch Security Systems, Inc.
To Next Page
Loading...
