To Next PageTo Next Page
Need help?Do you have a question about the Bosch Intuvia PowerPack 500 and is the answer not in the manual?
General| Battery voltage | 36 V |
|---|---|
| Battery capacity | 13.4 Ah |
| Battery type | Lithium-ion |
| Energy content | 500 Wh |
| Mounting type | Frame-mounted |
| Charging time | Approx. 4.5 hours (with 4A charger) |
| Compatibility | Bosch Active Line, Active Line Plus, Performance Line, Performance Line CX |
Safety instructions for the Drive Unit Cruise and Intuvia on-board computer.
Specifies the intended purpose of the drive unit.
Lists and describes the components of the eBike system.
Provides detailed technical specifications for components.
Instructions for installing components and verifying speed sensor.
Requirements and procedures for starting and powering the eBike system.
Details on eShift modes and display configurations.
How to adjust the motor's assistance level.
How speed, distance, and NuVinci settings are displayed.
Accessing and modifying system settings, and resetting data.
Actions for resolving detected system errors based on codes.
How gears interact with the system and factors affecting range.
Guidelines for safe handling, cleaning, and servicing the eBike.
Advice for transporting and disposing of eBike components.
Safety instructions specific to the lithium-ion battery pack.
Lists and describes the components of the battery pack.
Instructions for assembling and checking the battery pack before use.
Instructions for charging and understanding battery indicators.
Procedures for battery pack use, storage, and recharging.
Information on service, transport, and disposal of battery packs.
Safety instructions specific to the battery charger.
Lists and describes the components of the battery charger.
Steps for connecting and initially setting up the battery charger.
Procedures for charging the battery on or off the bike.
What to do if the charger fails, and disposal instructions.
