To Next PageTo Next PageWhy are three LEDs flashing on my Bosch Battery Charger battery pack?
If three LEDs on the Bosch Battery Charger's battery pack are flashing, it indicates that the battery pack is either too warm or too cold. Disconnect the battery from the charger and wait until it reaches the allowable charging temperature before reconnecting it.
What to do if my Bosch PowerPack 300 Battery Charger shows no indication when charging?
If the Bosch Battery Charger doesn't seem to be charging and there's no indication on the battery pack, start by checking all plug connections to ensure they are correctly inserted. Next, carefully clean the battery pack contacts. Finally, verify the mains voltage and have the charger inspected by a bicycle dealer to rule out defects in the socket outlet, cable, or charger itself.
General| Brand | Bosch |
|---|---|
| Model | PowerPack 300 |
| Category | Battery Charger |
| Language | English |
Read all safety warnings and instructions. Failure to follow may result in injury.
Defines purpose, lists components, and explains HMI display indicators.
Detailed technical specifications for the Drive Unit Cruise and Drive HMI.
Instructions for fitting and removing the battery pack and Drive HMI.
Steps for first-time activation and how to turn the eBike system on/off.
Managing HMI power, indicators, assistance levels, and basic settings.
Using push-assistance, lighting, viewing data, and system settings.
What error codes mean and how to respond to them.
