Bosch KGN27NWFAG - Replacing LED Lamp

4.7 Replacing LED lamp
Required tools:
Slotted screwdriver Blade 2.4mm x 0.4mm x 60mm, in
the kit [00341820]
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service or authorised techni-
cians only!
Danger
Risk of electric shock due to live parts!
Danger to life through electric shock in case of improper repair
▶
Electric parts should be repaired by a qualified electricians.
▶
After the repair have a safety test according VDE 0701 or country-
specific regulations performed.
Danger
Risk of electric shock due to live parts!
Death by electrocution
▶
Disconnect appliances from electrical supply at least 60 seconds
before starting repairs.
Caution
Sharp edges!
Cut injuries
▶
Wear protective gloves.
Prerequisite:
Appliance is disconnected from power supply.
Door is open.
Interior fittings are removed.
4.7.1 Removing LED lamp
1. Using slotted screwdriver release LED lamp cover hooks.
LED lamp cover is removed.
Repair
2021-04-19_9001640338 Copyright by BSH Hausgeräte GmbH Page102of409