en Cleaning and servicing
16
If liquid gets into the drainage hole,
the evaporation pan may overflow.
▶ The rinsing water must not get into
the drainage hole.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
▶ Never clean fittings and accessory
in the dishwasher.
1. Prepare the appliance for cleaning.
→Page15
2. Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3. Dry thoroughly with a soft, dry
cloth.
4. Insert the fittings.
5. Electrically connect the appliance.
→Page10
6. Putting the food into the appliance.
11.3 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
▶ Carefully clean the condensation
channel and the drainage hole,
e.g. using a moistened cotton bud.
11.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶ Lift the shelf at the front , pull it
out and remove it .
Removing door rack
▶ Lift the door rack and remove it.
Removing the fruit and vegetable
container
1. Pull out the fruit and vegetable
container as far as it will go.
To Next Page
Loading...
Need help?
General
