en Cleaning and servicing
16
▶ Do not use cleaning products with
a high alcohol content.
▶ Do not use stainless-steel cleaning
agents on the outside of the appli-
ance.
If liquid gets into the drainage hole,
the evaporation pan may overflow.
▶ The rinsing water must not get into
the drainage hole.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
▶ Never clean fittings and accessory
in the dishwasher.
1. Prepare the appliance for cleaning.
→Page15
2. Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3. Dry thoroughly with a soft, dry
cloth.
4. Insert the fittings.
5. Electrically connect the appliance.
→Page10
6. Switch on the appliance.
→Page13
7. Putting the food into the appliance.
11.4 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
▶ Carefully clean the condensation
channel and the drainage hole,
e.g. using a moistened cotton bud.
11.5 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
▶ Pull out and remove the shelf.