operation en
31
7. Place the blender jug onto the
main unit and rotate in a clockwise
direction until it locks into place.
→Fig.
5
8. Add the food to the blender jug.
→Fig.
6
Observe the minimum and max-
imum processing quantities.
→"Overview of recipes", Page34
9. Insert the measuring jug in the lid
and place the lid on the blender
jug.
→Fig.
7
The lid must be completely closed.
11.Insert mains plug.
12.Set the rotary switch to the recom-
mended speed.
→Fig.
8
13.Process the ingredients until you
achieve the required result.
14.To end the operation, set the rotary
switch to .
7.4 Using instantaneous
switching
1. Set the rotary switch to
and
hold it there.
→Fig.
9
a The ingredients are processed at
maximum speed.
2. Release the rotary switch.
a The rotary switch jumps to .
a Processing stops.
7.5 Pushing down food for
processing
1. Remove the measuring jug and in-
sert the pusher into the filling
opening.
→Fig.
10
2. Push down the food from the sides
of the blender jug.
→Fig.
10
7.6 Adding more ingredients
1. During processing, remove the
measuring jug and add the ingredi-
ents through the opening in the lid.
→Fig.
11
2. To add larger quantities, set the
rotary switch to .
3. Wait until the appliance stops.
4. Remove the lid.
→Fig.
12
5. Add the ingredients.
→Fig.
12
6. Place the lid on the blender jug
again and continue to process the
ingredients.
7.7 Emptying the blender jug
Requirement:The appliance has
stopped.
1. Turn the blender jug anti-clockwise
and remove it from the main unit.
→Fig.
13
2. To pour out all of the processed
food, remove the lid.
→Fig.
14
7.8 Processing food using
the To-Go blender jug
1. Prepare the food.
For example, cut large items of
food into pieces.
2. Add the food to the To-Go blender
jug.
→Fig.
15
Observe the minimum and max-
imum processing quantities.
→"Overview of recipes", Page34
3. Place the To-Go blade insert on
the To-Go blender jug.
→Fig.
15
To Next Page
Loading...
