-17-
FIG. 6FIG. 5
#%%' Sand with a smooth
back and forth motion, allowing the
weight of the tool to do the work.
"#%%' Avoid sanding with
only the tip of the pad. Keep as
much sand paper in touch with the
work surface as possible.
#%%' Always sand with the
pad and sandpaer flat against the
work surface. Work smoothly in a
back and forth motion.
"#%%' Avoid tipping the
pad. Always sand flat.
#%%' Always cut with a
smooth back and forth motion.
Never force the blade. Apply light
pressure to guide the tool.
"#%%' Do not twist the tool
while cutting.This can cause the
blade to bind.
#%%' Make sure flexible
scraper blade flexes enough
"#%%' Avoid screw head
touching surface with flexible
scraper blade.
To Next Page
Loading...
