22
Basic settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Indicator/
symbol
Function
³
Panel lock
¯Manual*.
³ Automatic.
Function deactivated.
Signal tones
¯Confirmation and error signals are switched off.
³ Only the error signal is switched on.
Only the confirmation signal is switched on.
´ All signal tones are switched on.*
´
Display energy consumption
¯Deactivated.*
³ Activated.
Automatically setting the cooking time
¯¯ Switched off.*
¯³-ÉÉ Time until automatic switch-off.
±
Audible signal duration for the timer function
³10 seconds.*
30 seconds.
´ 1 minute.
Å
Power management function. Limiting the total power of the cooktop
The available settings depend on the maximum power of the cooktop.
¯ Deactivated. Maximum power of the cooktop. */**
³ 1000 W minimum power.
³.1500 W
...
´3000 W recommended for 13 A.
´.3500 W recommended for 16 A.
4000 W
.4500 W recommended for 20 A.
...
É or É.Maximum power of the cooktop.**
³³
Changing the preset heat settings for the PowerMove function
ÓÉ Preset heat setting for the front cooking zone.
Ä Preset heat setting for the central cooking zone.
³ Preset heat setting for the rear cooking zone.
³
Check the cookware and the cooking results
¯Not suitable
³Not perfect
Suitable