To Next PageTo Next Page
Need help?Do you have a question about the Bosch PFZ 600 E and is the answer not in the manual?
General| Power | 600 W |
|---|---|
| Cutting Depth (Steel) | 10 mm |
| Blade Length | 160 mm |
| Stroke Rate | 500 - 2600 spm |
| No-load Speed | 0-2300 min⁻¹ |
| Saw Blade Diameter | 160 mm |
| Cutting Depth at 90° | 85 mm |
| Cutting Depth at 45° | 60 mm |
Describes the components and parts of the saw.
Details noise and vibration measurements according to EN 50 144.
Explains the machine's purpose for sawing, filing, brushing, and polishing.
Essential safety guidelines for safe operation and handling.
Step-by-step guide on how to change the saw blade.
Details on initial setup, switching on/off, and stroke rate adjustment.
Instructions on adjusting the base plate for secure rest.
Explanation of orbital action levels for different materials.
Guides on general sawing, plunge cutting, and flush sawing.
Tips for tight curves and sawing metal.
Procedures for keeping the machine clean and functional.
Contact information for service and customer support.
Guidelines for recycling machine parts and packaging.
