en Basic settings
40
Basic setting Display text Selection Description
TimeLight S:01
1
S:00 - S:01 Switch TimeLight on or off.
While the programme is run-
ning, status information is
projected onto the floor be-
low the appliance door relat-
ing to timer programming,
the programme or the time
remaining. If the base panel
is pulled forwards or if the
appliance is installed at eye
level with the cabinet front
fitted flush, the display is not
visible.
Level "S:00" switches Time-
Light off.
Start programme SP:01
1
SP:00 - SP:01 Set a default programme for
when the appliance is
switched on.
¡ With the setting "SP:00",
the last programme selec-
ted is set by default when
the appliance is switched
on.
¡ With the setting "SP:01",
the Eco 50° programme
is set by default when the
appliance is switched on.
Tone volume SL:02
1
SL:00 -SL:03 Adjustment of tone volume.
Level "SL:00" switches the
signal tone off.
If the Eco drying function is
activated, the end of the pro-
gramme is not indicated by
an audible signal tone.
Button volume bL:02
1
bL:00 - bL:03 Set the button volume during
operation. Level "bL:00"
switches the button tones
off.
1
Factory setting (may vary according to model)
To Next Page
Loading...
Need help?
General
