Bosch PIB FB Series Information For Use

Basic settings en
39
Basic settings
16 Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
16.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting Display text Selection Description
Water hardness H:04
1
H:00 - H:07 Set the water softening sys-
tem to your water hardness.
→"Setting the water soften-
ing system", Page28
Level H:00 switches the wa-
ter softening system off.
Rinse aid dis-
pensing
r:05 
1
r:00 - r:06 Set the amount of rinse aid
to be dispensed.
Switch the rinse aid system
off with level r:00.
Sensor setting SE:00
1
SE:00 - SE:02 Set the water sensor for
identifying soiling.
→"Sensors", Page12
Extra Dry d:00
1
d:00 - d:01 The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time slightly.
Note:Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d:01"
or off "d:00".
Hot water A:00
1
A:00 - A:01 Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this
can be prepared with little
energy and a suitable install-
ation is available, e.g. solar
heating system with circula-
tion line. The water temperat-
ure should be at least 40°C
and max. 60°C.
Switch hot water on "A:01"
or off "A:00".
1
Factory setting (may vary according to model)

Bosch PIB FB Series Specifications

General

Brand	Bosch
Model	PIB FB Series
Category	Hob
Language	English