28 | English
1 609 92A 1F3 | (20.8.15) Bosch Power Tools
Laser class 2
Laser type
635 nm, <1 mW
Laser beam diameter (at 25 °C)
approx.
–at 10m distance
–at 50m distance
9mm
45 mm
Automatic switch-off after approx.
–Laser
–Measuring tool
(without measurement)
– Bluetooth® (if inactive)
20 s
5min
3min
Weight according to EPTA-Procedure
01:2014
0.16 kg
Dimensions (length x width x height)
115x50x23mm
Batteries
3x1.5VLR03(AAA)
Battery life, approximately
– Individual measurements
– Continuous measurement
10000
E) G)
2.5 h
E) G)
Data transmission
Bluetooth® Bluetooth® 4.0 (Classic and Low Energy)
F)
A) For measurements from the rear measuring-tool edge. The working range increases depending
on how well the laser light is reflected from the surface of the target (scattered, not reflective) and
the brighter the laser point is to the ambient light intensity (interior spaces, twilight). For distances
of less than 20 m a retro-reflective target plate should not be used, as it can lead to measurement
errors.
B) For measurements from the rear measuring-tool edge, 100 % reflectance of the target (e.g., a
white-painted wall), weak backlight and 25 °C operating temperature. Additionally, a deviation in-
fluence of ±0.05 mm/m must be taken into account.
C) After calibration at 0 ° and 90 ° with an additional grade error of ±0.01 °/degree to 45 ° (max.).
D) In the continuous measurement function, the maximum operating temperature is +40 °C.
E) At 25 °C operating temperature
F) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
G) Bluetooth® deactivated
The measuring tool can be clearly identified with the serial number 6 on the type plate.
Digital Laser Measure PLR 50 C
OBJ_BUCH-2326-003.book Page 28 Thursday, August 20, 2015 8:43 AM
To Next Page
Loading...
