Bosch POF 1200 AE - Intended Use; Product Features; Technical Data

16 | English
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for copy routing as well as routing
grooves, edges, profiles and elongated holes in wood,
plastic and light building materials while resting firmly on the
workpiece.
Can even be used to machine non-ferrous metals when used
at a low speed with the appropriate router bits.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Lock-off button for on/off switch
(2)
Right handle (insulated gripping surface)
(3)
Spindle lock button
(4)
Wing bolt for parallel guide rods (2x)
a)
(5)
Chip protection
(6)
Base plate
(7)
Guide plate
(8)
Holder for parallel guide rods
(9)
Step buffer
(10)
Protective sleeve
(11)
Wing bolt for adjusting the depth stop
(12)
Slide with index mark
(13)
Depth stop
(14)
Scale for setting the routing depth
(15)
Left handle (insulated gripping surface)
(16)
Clamping lever for locking the routing depth
(17)
Routing depth fine-adjustment scale
(POF1400ACE)
(18)
Routing depth fine-adjustment knob (POF1400ACE)
(19)
Marking for zeroing
(20)
Unlocking lever for guide bushing
(21)
Router bit
a)
(22)
On/off switch
(23)
Speed preselection thumbwheel
(24)
Adjusting screws for step buffer (POF1200AE)
(25)
Cap nut with collet
(26)
Open-ended spanner (19mm)
a)
(27)
Extraction hose (dia.35 mm)
a)
(28)
Dust extraction adapter
a)
(29)
Knurled screw for dust extraction adapter (2x)
a)
(30)
Parallel guide rod (2x)
a)
(31)
Parallel guide
a)
(32)
Centring pin
a)
(33)
Wing bolt for centring pin
a)
(34)
Curve guide
a)
(35)
Router compass/guide rail adapter
a)
(36)
Handle for router compass
a)
(37)
Wing bolt for router compass coarse
adjustment (2x)
a)
(38)
Wing bolt for router compass fine adjustment (1x)
a)
(39)
Knob for router compass fine adjustment
a)
(40)
Centring screw
a)
(41)
Guide rail
a)
(42)
Spacer plate (part of the router compass set)
a)
(43)
Guide bushing
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Router POF 1200 AE POF 1400 ACE
Article number
3 603 B6A 0.1 3 603 B6C 7.1
Rated power input W 1200 1400
No-load speed min
-1
11000–28000 11000–28000
Speed preselection ● ●
Constant Electronic – ●
Connection for dust extraction ● ●
Tool holder mm
inches
6/8
¼
6/8
¼
Router cage stroke mm 55 55
Weight according to EPTA-Procedure 01:2014 kg 3.4 3.5
Protection class
/ II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
1 609 92A 66X | (25.03.2021) Bosch Power Tools