Bosch PowerPack 300 BBS245 - Technical Data

English – 2
(1)
Rack-mounted battery holder
(2)
Rack-mounted battery
(3)
Operation/state of charge indicator
(4)
On/off button
(5)
Key for the battery lock
(6)
Battery lock
(7)
Upper standard battery holder
(8)
Standard battery
(9)
Lower standard battery holder
(10)
Cover (supplied only on eBikes with two battery
packs)
(11)
Charger
(12)
Socket for charging connector
(13)
Charging socket cover
(14)
PowerTube battery safety restraint
(15)
PowerTube battery
(16)
PowerTube battery safety hook
Technical data
Li-ion battery PowerPack 300 PowerPack 400 PowerPack 500
Product code BBS245
A) B)
BBR245
B) C)
BBS265
A)
BBR265
C)
BBS275
A)
BBR275
C)
Rated voltage V= 36 36 36
Nominal capacity Ah 8.2 11 13.4
Energy Wh 300 400 500
Operating temperature °C −5 to +40 −5 to +40 −5 to +40
Storage temperature °C +10 to +40 +10 to +40 +10 to +40
Permitted charging temperature range °C 0 to +40 0 to +40 0 to +40
Weight, approx. kg 2.5
A)
/2.6
C)
2.5
A)
/2.6
C)
2.6
A)
/2.7
C)
Protection rating IP 54 IP 54 IP 54
A) Standard battery
B) Cannot be used in combination with other batteries in systems with two batteries
C) Rack-mounted battery
Li-ion battery PowerTube 400 PowerTube 500 PowerTube 625
Product code BBP282 horizontal
A)
BBP283 vertical
A)
BBP280 horizontal
BBP281 vertical
BBP290 horizontal
BBP291 vertical
Rated voltage V= 36 36 36
Nominal capacity Ah 11 13.4 16.7
Energy Wh 400 500 625
Operating temperature °C –5to+40 –5to+40 –5to+40
Storage temperature °C +10to+40 +10to+40 +10to+40
Permitted charging temperature range °C 0to+40 0to+40 0to+40
Weight, approx. kg 2.9 2.9 3.5
Protection rating IP 54 IP 54 IP 54
A) Cannot be used in combination with other batteries in systems with two batteries
Fitting
u Ensure the battery is placed on clean surfaces only.
Avoid getting dirt, e.g. sand or soil, in the charging socket
and contacts in particular.
Testing the battery before using it for the first
time
Test the battery before charging it for the first time or using
it in your eBike.
To do this, press the on/off button (4) to switch the battery
on. If none of the LEDs on the battery charge indicator (3)
light up, the battery may be damaged.
If at least one (but not all) of the LEDs on the battery charge
indicator (3) lights up, the battery will need to be fully
charged before using it for the first time.
0 275 007 XPX | (11.03.2022) Bosch eBike Systems