Bosch Professional GBH 18V-26 F - Technical Data

English | 4
Bosch Power Tools 1 609 92A 3YU | (2.8.17)
30 Retaining ring of the quick change keyless chuck
(GBH 18V-26 F)
31 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Assembly
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
Battery Charging (see figure A)
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery of your power tool.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the Electronic Cell Protection (ECP). When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Do not continue to press the On/Off switch after the
machine has been automatically switched off. The bat-
tery can be damaged.
Rotary Hammer GBH 18V-26 GBH 18V-26 F
Article number
3 611 J09 0.. 3 611 J10 ...
Speed control
 
Stop rotation
 
Right/left rotation
 
Quick change chuck
– 
Rated voltage
V= 18 18
Rated power input
W 425 425
Impact rate
min
-1
0–4350 0–4350
Impact energy per stroke according to
EPTA-Procedure 05/2009
J2.6 2.6
Rated speed
– Right rotation
– Left rotation
min-1
min
-1
0–890
0–890
0–890
0–890
Tool holder
SDS-plus SDS-plus
Spindle collar diameter
mm 50 50
Drilling diameter, max.:
–Concrete
– Brickwork (with core bit)
– Steel
– Wood
mm
mm
mm
mm
26
68
13
30
26
68
13
30
Weight according to EPTA-Procedure 01:2014
kg 3.0–3.5 3.3–3.8
Length
mm 347 378
Height
mm 225 225
Permitted ambient temperature
– during charging
– during operation
*
and during storage
°C
°C
0...+45
–20...+50
0...+45
–20...+50
Recommended batteries
GBA 18V ... GBA 18V ...
Recommended chargers
AL 18..CV
GAL 3680..
AL 18..CV
GAL 3680..
* limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
OBJ_DOKU-61647-001.fm Page 4 Wednesday, August 2, 2017 10:03 AM