Bosch Professional GBH 2-26 - Product Description and Specifications; Intended Use; Product Features; Technical Data

14 | English
1 609 92A 33G | (13.10.16) Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Quick change keyless chuck (GBH 2-26 F)
2 SDS-plus quick change chuck (GBH 2-26 F)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck (GBH 2-26 F)
7 Rotational direction switch
8 Lock-on button for On/Off switch
9 On/Off switch
10 Release button for mode selector switch
11 Mode selector switch
12 Button for depth stop adjustment
13 Depth stop
14 Auxiliary handle (insulated gripping surface)
15 Handle (insulated gripping surface)
16 Securing screw for key type drill chuck*
17 Key type drill chuck*
18 SDS-plus adapter shank for drill chuck*
19 Drill chuck mounting (GBH 2-26 F)
20 Front sleeve of the quick change keyless chuck
(GBH 2-26 F)
21 Retaining ring of the quick change keyless chuck
(GBH 2-26 F)
22 Dust extraction* (GDE 16 Plus)
23 Dust cup*
24 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Rotary Hammer GBH 2-26 GBH 2-26 F
Article number 3 611 ...
BA3 0.. BA4 0..
Speed control
 
Stop rotation
 
Right/left rotation
 
Quick change chuck
– 
Rated power input
W 830 830
Impact rate
min
-1
0–4000 0–4000
Impact energy per stroke according to EPTA-Procedure 05/2009
J2.72.7
Speed
min
-1
0–1300 0–1300
Tool holder
SDS-plus SDS-plus
Spindle collar diameter
mm 50 50
Drilling diameter, max.:
– Concrete *
– Brickwork (with core bit)
– Steel
– Wood
mm
mm
mm
mm
26
68
13
30
26
68
13
30
Weight according to EPTA-Procedure 01:2014
kg 2.7 2.9
Protection class
/II /II
*not suitable with core bit
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-2718-003.book Page 14 Thursday, October 13, 2016 11:15 AM