To Next PageTo Next Page
Need help?Do you have a question about the Bosch PSB 500-2 and is the answer not in the manual?
Identifies and describes the various components of the power tool.
Provides measured noise and vibration levels according to EN 50 144.
Details the applications for which the machine is designed, including drilling and screwdriving.
Covers essential safety guidelines for operating the machine safely.
Instructions for mounting the auxiliary handle and setting the depth stop.
Procedure for correctly inserting drill bits and accessories into the chuck.
How to insert and remove tools using the keyless chuck.
Securing and releasing tools with the keyless chuck.
Instructions for clamping tools using the key chuck and key.
Guidance on using screwdriver bits and bit holders.
How to start, stop, and lock the machine's operation.
Instructions for changing the drill's rotation direction.
Description of the two-speed selection mechanism.
How to adjust the rotational speed using the thumbwheel.
Guidance on selecting modes for drilling, screwdriving, and impact drilling.
Step-by-step guide for replacing the drill chuck.
Provides advice on speed selection, cooling, and using specific drill bits.
Instructions for keeping the machine clean and in good working order.
Crucial warnings regarding plug connection and cable safety.
General
