To Next PageTo Next Page
Need help?Do you have a question about the Bosch PSB 500 and is the answer not in the manual?
General| Power | 500 W |
|---|---|
| Max. drilling diameter in concrete | 10 mm |
| Max. drilling diameter in steel | 8 mm |
| Max. drilling diameter in wood | 25 mm |
| Chuck type | Keyless chuck |
| Chuck capacity | 1.5 - 10 mm |
| Cable length | 2.5 m |
Identification of the main components of the power tool.
Details measured noise and vibration levels according to EN 50 144.
Specifies the applications and materials the machine is designed for.
Instructions for mounting the auxiliary handle and setting the drilling depth.
Guidance on how to properly insert drill bits and accessories into the chuck.
Steps for inserting and removing tools using the keyless chuck.
Procedures for inserting and changing tools using keyless and key chucks.
Guidance on using screwdriver bits and bit holders.
Details on switching, direction reversal, speed selection, and mode settings.
Practical advice for drilling, cooling, and using specific materials.
Guidelines for machine upkeep, professional servicing, and electrical connection safety.
