en
10
Switching
the appliance on
Fig. "
Switch on the appliance with the On/Off
button !/12.
A warning signal sounds.
The temperature display 1 flashes
and the alarm display 5 is lit.
Press the “alarm” button 5. The warning
signal switches off and the temperature
display 1 stops flashing.
Display alarm goes out when
the appliance has reached the set
temperature.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: –18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■ The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 9 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 3.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
10 “Super” button refrigerator
compartment
Switches super cooling on and
off.
To Next Page
Loading...
Need help?
General
