en Display
22
--------
˜
ª
Selection buttons
A Start and Pause
Detailed description of the programme settings from ~ Page 26
Indicator/
symbol
Description Information
Programme status: Continuously lit: Status indicator
Š Drying
ö Dryness level: Iron Dry
» Dryness level: Cupboard Dry
Ò Dryness level: Cupboard Dry
Plus
Q Anti-Crease
- ˜ - Pause
“Ÿš Program end
‹ ‹ : ‹ ‹ Programme duration Expected programme duration in hours and minutes.
e.g. ñ 02:45 Programme delay Appears when altering and activating the "Ready in"
time
ð Empty the condensation con-
tainer ~ Page 33
■ Empty the condensation container and then rein-
sert it.~ Page 33
Then press A (Start/Pause).
■ Clean the filter in the condensation container.
■ If the optional drain hose* is installed, make sure
that the drain hose:
– Is correctly connected. ~ Page 44
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
■ Run the intensive appliance care programme.
■ Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris.
å Fluff filter Remove the fluff ~ Page 34
ó
ªªª
Automatic heat exchanger
rinse
Rinsing progress indicator
The heat exchanger is cleaned automatically. Do not
pull out the condensation container or cancel the pro-
gramme while this is displayed.
| Wi-Fi ■ Off: Wi-Fi is switched off and your appliance is not
connected to your home network.
■ Flashing: The appliance is trying to connect to your
home network.
■ Lit: Wi-Fi is switched on and your appliance is con-
nected to your home network.
To Next Page
Loading...
Need help?
General
