en Appliance care
56
6. Pull out the condensation container
horizontally and empty it.
7. Pour a bottle of the original
appliance care product and
approx. 1 ^ litre of warm tap water
into the condensation container.
Note: Hold the full condensation
container horizontally at all times so
that no liquid spills out.
8. Slide in the condensation container
until it clicks into place.
9. Press A (Start/Pause).
The appliance care programme will start
and an audible signal will sound.
After approx. three hours, the appliance
pauses the appliance care programme
and the remaining programme duration
flashes in the display.
10.Pull out the condensation container
horizontally and empty it.
11.Pour approx. 1 ^ litre of warm tap
water into the condensation
container.
Note: Hold the full condensation
container horizontally at all times so
that no liquid spills out.
To Next Page
Loading...
Need help?
General
