20 | English
Angle grinder PWS 700 PWS 7000 PWS 7-115 PWS 700-115 PWS 700-125
Restart protection ● ● ● ● ●
Weight according to EPTA-Procedure 01:2014
– with additional low-
vibration auxiliary
handle
kg 1.7 1.7 1.7 1.7 1.7
– with standard auxili-
ary handle
kg 1.7 1.7 1.7 1.7 1.7
Protection class
/ II / II / II / II / II
Angle grinder PWS 730-115 PWS 750-115 PWS 750-125 PWS 7500
Article number
3603CA24.. 3603CA24.. 3603CA24.. 3603CA24..
Rated power input W 730 750 750 750
Rated speed min
-1
12,000 12,000 12,000 12,000
Max. grinding disc diameter mm 115 115 125 125
Grinding spindle thread M 14 M 14 M 14 M 14
Max. thread length of grinding spindle mm 21 21 21 21
Restarting Protection ● ● ● ●
Weight according to EPTA‑Procedure 01:2014
– with additional low-vibration auxiliary
handle
kg 1.8 1.8 1.8 1.8
– with standard-auxiliary handle kg 1.8 1.8 1.8 1.8
Protection class
/ II / II / II / II
Angle grinder PWS 780-125 PWS 8000 PWS 850-125 PWS 8500-125
Article number
3603CA27.. 3603CA27.. 3603CA27.. 3603CA27..
Rated power input W 780 800 850 850
Rated speed min
-1
12,000 12,000 12,000 12,000
Max. grinding disc diameter mm 125 125 125 125
Grinding spindle thread M 14 M 14 M 14 M 14
Max. grinding spindle thread length mm 21 21 21 21
Restart protection ● ● ● ●
Weight according to EPTA‑Procedure 01:2014
– with additional low-vibration auxiliary
handle
kg 1.8 1.8 1.8 1.8
– with standard auxiliary handle kg 1.8 1.8 1.8 1.8
Protection class
/ II / II / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
PWS 700 PWS 7000 PWS 7-115 PWS 700-115 PWS 700-125
3 603 CA2 0.. 3 603 CA2 0.. 3603CA20.. 3603CA20.. 3603CA20..
Noise emission values determined according to EN60745-2-3.
Typically the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
dB(A)
dB(A)
dB
91
102
3
91
102
3
91
102
3
91
102
3
91
102
3
1 609 92A 5NX | (04.03.2020) Bosch Power Tools