English | 21
Bosch Power Tools 2 609 006 763 | (17.1.13)
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Technical Data
Measured sound values
determined according to
EN 60745.
PWS ... 780-125 7500 7800 850-115 850-125
3 603 ... CA2 7.. CA2 4.. CA2 7.. CA2 7.. CA2 7..
Vibration total values a
h
(tri-
ax vector sum) and uncer-
tainty K determined accord-
ing to EN 60745:
Surface grinding:
a
h
K
Disk sanding:
a
h
K
m/s
2
m/s
2
m/s
2
m/s
2
10.0
1.5
5.0
1.5
10.0
1.5
5.0
1.5
10.0
1.5
5.0
1.5
10.0
1.5
5.0
1.5
10.0
1.5
5.0
1.5
Angle Grinder PWS ... 680-115 700 7-115 700-115 7000 700-125
Article number
3 603 ... CA2 0.. CA2 0.. CA2 0.. CA2 0.. CA2 0.. CA2 0..
Rated power input
W 701 701 701 701 701 701
Rated speed
min
-1
11000 11000 11000 11000 11000 11000
Grinding disc diameter,
max.
mm 115 115 115 115 115 125
Thread of grinder spindle
M 14 M 14 M 14 M 14 M 14 M 14
Thread length (max.) of
grinder spindle mm 21 21 21 21 21 21
Weight according to
EPTA-Procedure
01/2003 with standard-
auxiliary handle
kg 1.7 1.7 1.7 1.7 1.7 1.7
Protection class
/II /II /II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Angle Grinder PWS ... 700-115 720-115 730-115 750-115 750-125 75-115 7500
Article number
3 603 ... CA2 4 .. CA2 4 .. CA2 4 .. CA2 4 .. CA2 4 .. CA2 4.. CA2 4..
Rated power input
W 701 720 730 750 750 750 750
Rated speed
min
-1
12000 12000 12000 12000 12000 12000 12000
Grinding disc diameter,
max.
mm 115 115 115 115 125 115 125
Thread of grinder spindle
M 14 M 14 M 14 M 14 M 14 M 14 M 14
Thread length (max.) of
grinder spindle mm 21 21 21 21 21 21 21
Weight according to
EPTA-Procedure
01/2003 with standard-
auxiliary handle
kg 1.8 1.8 1.8 1.8 1.8 1.8 1.8
Protection class
/II /II /II /II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-1824-001.book Page 21 Thursday, January 17, 2013 10:33 AM
To Next Page
Loading...
