Bosch PXX375FB1E - Page 10

en FlexInduction
10
7 FlexInduction
The flexible cooking zone allows you to position cook-
ware of any shape or size any way you like. It consists
of four inductors that work independently of each other.
When the flexible cooking zone is in use, only the area
that is covered by cookware is activated.
7.1 Positioning the cookware
The flexible cooking zone can be configured in two
ways, depending on which cookware is used. In order
to guarantee good thermal detection and heat distribu-
tion, we recommend positioning the cookware in the
centre, as shown in the figures.
As a connected cooking zone
Recommended for cooking with just one item of cook-
ware.
¡ Position the cookware depending on the size:
Ø ≤ 13 cm. Ø > 13 cm.
¡ Recommended oblong cookware ⁠:
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
7.2 FlexInduction connect
By default, the FlexZone is configured as two separate
cooking zones. Switch on the following function to con-
nect the cooking zones:
1.
Select one of the two cooking zones.
2.
Touch ⁠.
a The display lights up. The FlexZone is connected.
Note:If you move or lift the cookware from an active
connected cooking zone, an automatic search starts.
Each item of cookware that is found within the cooking
zone during this search is heated at the previously se-
lected power level.
7.3 FlexInduction disconnecting
▶
Touch ⁠.
a The cooking zones are separate and work inde-
pendently of each other.
8 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
¡ Count-up timer
8.1 Switch-off timer
You can use this function to programme a cooking
time for one or more cooking zones. The cooking zone
is automatically switched off once the time that is set
has elapsed.
Switching on Switch-off timer
1.
Select the cooking zone and the power level.
2.
Touch ⁠ twice.
a ⁠ on the cooking zone lights up.
3.
Within the next 10seconds, set the required cook-
ing time in the settings area.
‒ To set a cooking time of less than 10 minutes,
always touch 0 before you select the required
value.
a The cooking time begins to elapse.
a A signal tone sounds once the cooking time has
elapsed.
4.
Touch ⁠.
a The displays go out and the signal tone stops.
Changing or switching off Switch-off timer
1.
Touch ⁠ twice and then select the cooking zone.
2.
To delete the time, change the cooking time in the
settings range or set to ⁠.