Need help?Do you have a question about the Bosch Rexroth Marex SB and is the answer not in the manual?
General| Type | Hydraulic power unit |
|---|---|
| Pressure Range | Up to 350 bar |
| Application | Marine applications |
| Cooling | Air or water cooling (depending on model) |
| Material | Steel |
Detailed listing of all system components with their descriptions.
Essential requirements and conditions before operating the system.
Instructions for correctly mounting and installing system components.
Important operational guidance and safety precautions for users.
Explains configurations for single engine systems.
Details configurations for twin engine systems.
Guide for connecting the system's power supply.
Instructions for wiring and identifying control heads.
Wiring details for mechanical throttle and gear shifting systems.
Wiring details for electrical throttle and gear shifting systems.
Wiring diagrams and information for alarm relays.
Wiring instructions for the engine start interlock function.
Wiring details for the idle gas relay function.
How to configure the control unit hardware using switches.
Procedure for introducing and setting up control heads.
Settings for comparing positions and cruising ranges between stations.
Settings for synchronizing engine speeds for twin engines.
Setting parameters for idle speed, nominal speed, and power boost.
Adjusting positions for mechanical gear shifting.
Procedure to reset speed and gear control values to default.
Overview of lever positions for speed and gear control.
Steps to activate and request control from a station.
How to transfer control command between different stations.
Using the special function to warm up engines.
Enabling higher idle speed for additional functions.
Function to synchronize engine speeds for twin engines.
Description of alarms and warnings at the control station.
Explanation of error LEDs and their corresponding error types.
To Next Page
