Bosch Rotak 370 LI - Noise and Vibration Information; Mounting and Operation; Starting the Mower; Assembly Procedures

18 | English
F 016 L81 430 | (8.9.16) Bosch Power Tools
Noise/Vibration Information
Mounting and Operation Starting
For Your Safety
 Warning! Switch off, remove the isolator key and the
battery before adjusting, cleaning or if cable is cut,
damaged or entangled.
 The blades continue to rotate for a few seconds after
the machine is switched off.
 Caution – do not touch the rotating blade.
Battery Charging
 Do not use other battery chargers. The supplied battery
charger is designed for the Lithium-Ion battery in your gar-
den product.
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 45 °C. In this manner, a high battery service life is
achieved.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
Battery Charger
AL 3640 CV
Professional
AL 3640 CV
Professional
Article number EU
UK
2 607 225 099
2 607 225 101
2 607 225 099
2 607 225 101
Charging current
A4.04.0
Allowable charging temperature range
°C 0 – 45 0–45
Charging period (battery discharged)
–1.3
–2.0
–2.6
–4.0
min
min
min
min
45
45
65
80
45
45
65
80
Weight according to EPTA-Procedure 01:2014
kg 1.0 1.0
Protection class
/II /II
Cordless Lawnmower Rotak 370 LI Rotak 430 LI
*with AL 3640 CV Professional charger
Sound emission values determined according to EN 60335-2-77. 3 600 ... HA4 4.. HA4 5..
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
dB(A)
dB(A)
dB
75
89
=1.0
76
90
=1.0
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to
EN 60335-2-77:
Vibration emission value a
h
Uncertainty K
m/s
2
m/s
2
<2.5
=1.5
<2.5
=1.5
Action Figure Page
Delivery Scope
1 305
Handle Assembly
2 306
Snap together the Grassbox
Grassbox fitting/removing
3 306–307
Battery Charging
4 307
Inserting the Battery
5 307
Insert Isolator Key and fit in the
Storage Position
6 308
Adjusting the Cutting Height
7 308
Starting
8 308–309
Working Advice
9 309
Stopping, Remove the isolator key
10 309–310
Removing the Battery
11 310
Blade Maintenance
12 310
Selecting Accessories
13 311
OBJ_BUCH-2332-002.book Page 18 Thursday, September 8, 2016 9:24 AM