EasyManua.ls Logo

Bosch Rotak 400 ER - Maintenance; Maintenance Safety Precautions; Symbols; Intended Use

Bosch Rotak 400 ER
199 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English | 13
Bosch Power Tools F 016 L81 627 | (3.8.16)
service agent. The replacement plug
should have the same fuse rating as
the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Maintenance
Always wear gardening gloves
when handling or working near the
sharp blades.
Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
Check the grass catcher frequently
for wear or deterioration.
Examine the machine and replace
worn or damaged parts for safety.
Ensure replacement cutting means of
the right type are used.
Ensure replacement parts fitted are
Bosch approved.
Before storage ensure machine is
clean and free from debries, if neces-
sary clean with a soft, dry brush.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Intended Use
The garden product is intended for domestic lawnmowing.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-77.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80 dB(A); sound power level 93 dB(A).
Uncertainty K=1.2 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335-2-77:
a
h
<2.5m/s
2
, K=1.5 m/s
2
.
Symbol Meaning
Movement direction
Reaction direction
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Lawnmower Rotak 400 ER
Article number
3 600 HA4 2..
Rated power input
W1700
Blade width
cm 40
Height of cut
mm 20 70
Grassbox, capacity
l50
Weight according to EPTA-
Procedure 01:2014
kg 13.1
Protection class
/II
Serial number
see type plate on the
garden product
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Symbol Meaning
OBJ_BUCH-2958-001.book Page 13 Wednesday, August 3, 2016 2:41 PM

Related product manuals