Bosch Rotak 400 ER - Mounting and Operation; Troubleshooting; After-sales Service; Service and Parts Contact

14 | English
F 016 L81 627 | (3.8.16) Bosch Power Tools
Mounting and Operation
Troubleshooting
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Action Figure Page
Delivery Scope
1 189
Handle Assembly
2 190
Snap together the Grassbox
3 190
Grassbox fitting/removing
3 190–191
Adjusting the Cutting Height
4 191
Connecting the extension lead
5 191
Starting 5 192
Working Advice
5 192
Stopping
5 192
Working Advice
6 193
Blade Maintenance
7 193
Selecting Accessories
8 194
Action Figure Page
STOP
Problem Possible Cause Corrective Action
Motor refuses to start Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Grass too long Increase height of cut and tilt garden product to re-
duce starting load
Motor protector has activated Allow motor to cool and increase height of cut
Machine functions
intermittently
Extension cable damaged Inspect cable, replace if damaged
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated Allow motor to cool and increase height of cut
Machine leaves ragged
finish
and/or
Motor labours
Height of cut too low Increase height of cut
Cutting blade blunt Replace the blade
Possible clogging Check underneath the garden product and clear
out as necessary (always wear protective gloves)
Blade fitted upside down Refit blade correctly
Blade not rotating
while garden product
switched on
Cutting blade obstructed Switch off garden product
Clear obstruction (always wear protective gloves)
Blade nut/bolt loose Tighten blade nut/bolt (17 Nm)
Excessive vibra-
tions/noise
Blade nut/bolt loose Tighten blade nut/bolt (17 Nm)
Cutting blade damaged Replace the blade
OBJ_BUCH-2958-001.book Page 14 Wednesday, August 3, 2016 2:41 PM