Bosch SB Series - Programme Selection and Timing; Locks and Programme Interruption

en Basic operation
40
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
→"Programmes", Page21
▶
Press the button for the relevant
additional function.
→"Additional functions", Page23
a The additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press ⁠.
2. Press or repeatedly until the
display shows the right time.
Depending on the setting of the
time display, the end of the pro-
gramme is shown on the display
either with "Finish in" (e.g.
3h25min) or "Finish at" (e.g.
15:20hours). You can change this
setting in the Basic settings
→Page42.
3. To activate timer programming,
press ⁠.
Tip:To deactivate timer program-
ming, press for approx.
3seconds.
Starting the programme
▶
Press .
a The display shows the programme
information.
a The programme has ended when
the display shows "Finished".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→"Terminate programme",
Page41
¡ The appliance switches off auto-
matically 1minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Requirement:A programme has
started. →Page40
▶
Press for approx. 3seconds.
a The button lock is activated and
will be automatically deactivated at
the end of the programme.
a The display shows "Activated child-
proof lock" when the appliance is
running.
a The button lock remains activated
with a power failure.
Deactivate button lock
▶
Press for approx. 3seconds.
Interrupting programme
Note:When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This