Bosch SB Series - Terminate Programme; Display Programme Information; Switching off Appliance

Basic operation en
41
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1. Press ⁠.
a The programme is saved and the
appliance switches off.
2. Press to resume the pro-
gramme.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to ter-
minate it first.
▶
Press for approx.
3seconds.
a The programme is terminated and
ends after approx. 1minute.
a The display shows "Program was
terminated. ", followed by "Fin-
ished".
Display programme informa-
tion
You can show information about pro-
grammes and additional functions on
the display.
1. Press ⁠.
2. Press the programme button or an
additional function.
Switching off appliance
1. Please note the information on
Safe use →Page11.
2. Press .
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.