Bosch SB Series - Remote Operation and Energy Management

en HomeConnect
46
a If the appliance is not connected
to the WLAN home network (Wi-Fi),
the display shows "Network login
Failed".
6. If the display shows "Network login
Failed", repeat the process.
7. Press ⁠.
a The display shows "Connect to
App".
8. Press to connect the appliance
to the app.
‒ Follow the instructions in the
app.
a If the appliance is connected to the
app, the display shows "Network
login Successful".
a If the appliance is not connected
to the app, the display shows "Net-
work login Failed".
9. If the appliance is not connected
to the app, check that the mobile
device is in the WLAN home net-
work (Wi-Fi) and repeat the pro-
cess.
10.To exit login, press ⁠.
Tip:Terminate login by pressing
for approx. 3seconds.
HomeConnect settings
Adapt HomeConnect to your needs.
You can find the HomeConnect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
HomeConnect has been set up and
whether the appliance is connected
to your home network.
Remote start
You can use the HomeConnect app
to start the appliance with your mo-
bile device.
Tip:If you start operation on the ap-
pliance itself, remote start is automat-
ically deactivated.
Activating remote start
Requirements
¡ The appliance is connected to your
WLAN home network. →Page44
¡ The appliance is connected to the
HomeConnect app.
¡ A programme has been set.
→Page39
▶
Press ⁠.
a The display shows "Remote start is
activated.".
Note:If you open the appliance door,
remote start is automatically deactiv-
ated.
Deactivating remote start
Requirement:Remote start is activ-
ated. →Page46
▶
Press .
a The display shows "Remote start
was deactivated. Please re-activ-
ate. ".
Remote Diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the HomeCon-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
Energy manager
You can connect your appliance to
the energy manager of your home
system.
The energy management system will
manage the power supply from your
conventional and alternative energy