Bosch SGV78C53UC - Modifying Appliance Settings

Basic settings en-us
35
Basic setting Display
text
Selection Description
Remote Start rc1 rc0 - rc2 Activate or deactivate
→ "Remote Start ",
Page37 .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the but-
ton.
→ "Activating Remote
Start ", Page37
¡ With the setting "rc2",
the option is perma-
nently activated.
The basic setting is not
available until you have
connected the appliance
with the HomeConnect®
app.
→ "HomeConnect® ",
Page36
Factory setting rE Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)
14.2 Changing the basic
settings
1. Open the appliance door.
2. Press ⁠.
3. To open the basic settings,
press for 3 seconds.
a The display shows Hxx.
a The display shows ⁠.
4. Press repeatedly un-
til the display shows the re-
quired setting.
5. Press repeatedly until the
display shows the right value.
You can change one or more
settings.
6. To save the settings, press
for 3 seconds.
7. Close the appliance door.