Basic Operation en-us
17
12.6 Starting the wash cycle
▶ Press .
a The wash cycle has ended when no displays on the
controls are lit.
Notes
¡ If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡ You can only change a cycle in progress if you can
cancel it first.
→
"Terminating the wash cycle", Page17
¡ To save energy, the appliance switches off
automatically 10minutes after the end of the wash
cycle. If you open the appliance door immediately after
the wash cycle has ended, the appliance will switch off
after 4 seconds.
12.7 Activating the button lock
The button lock prevents the appliance from being
operated accidentally or incorrectly while running.
▶ Press for approx. 3seconds.
a The button lock is activated and will be automatically
deactivated at the end of the cycle.
a The button lock remains activated with a power failure.
12.8 Deactivating the button lock
▶ Press for approx. 3seconds.
12.9 Interrupting the wash cycle
1. Press On/Off.
The program is saved and the appliance switches off.
2. Press On/Off.
3. Press to resume the wash cycle.
12.10 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
1. Open the appliance door.
2. Press for approx. 4seconds.
3. Close the appliance door.
a All displays light up.
a As soon as the displays are off, the residual water is
pumped out.
a The cycle is cancelled and ends after approx. 1minute.
12.11 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
▶ Do not fully open the door until water noises have
stopped and steam has subsided.
1. Please note the information on Preventing Material
Damage →
Page5
.
2. Press On/Off.
To Next Page
Loading...
