To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHU9955 and is the answer not in the manual?
Explains the warning symbol for serious safety alerts like injury or death.
Lists potential hazards like electric shock and sharp edges.
Warns about electric shock danger and safe practices during repair.
Discusses property damage risks from improper water connections.
States no PC boards are handled in repair, thus no ESD concern.
Confirms no CFCs or refrigerants are used in dishwashers.
States no emissions, notes potential smells from drain connections.
Confirms no carbon monoxide is emitted.
Indicates no government compliance issues.
Lists certifications like UL, Energy Star, and NSF.
Provides key specifications like voltage, amp draw, water pressure, and motor ratings.
Explains model number changes and provides legends for current and older models.
Describes where to find the model and serial number label on the dishwasher.
States the wiring and circuit diagram is folded and located in a slot.
Details limited lifetime warranties for various components like racks, electronics, and rust-through.
Refers to attached installation instructions for location requirements.
Refers to attached installation instructions for electrical requirements.
Refers to attached installation instructions for water/drain requirements.
Refers to attached installation instructions for shipping and packaging removal.
Covers leveling, handle installation, door reversal, and a quick test procedure.
Lists common issues like filter cleaning, smells, door leaks, and damage.
Explains pump usage, flow-through heaters, NTC sensors, and condensation drying.
Details components like circulation pump, drain pump, impeller, heaters, NTC, thermostats, and control modules.
Describes accessing the water valve by removing the toe kick and lists steps for removal.
Shows different water valve part numbers and notes on upgrades and replacement.
Explains how to access the circulation pump by removing the outer door.
Details removing the toe kick and side panels to access circulation pumps.
Describes raising the right side of the tank for circulation pump access.
Provides steps to remove the motor to access the impeller or replace the pump.
Guides on removing and installing the impeller and reassembling the pump.
Explains how to remove control modules by bending console tabs.
Details disassembly for specific SHY/SHU/SHV models with different procedures.
Instructions for removing/installing display modules on SHY56A/66C models.
Covers Apexx control module removal, noting they are base-mounted.
Details removing side panels for Apexx control module access.
Explains raising the tank for Apexx module access.
Shows steps for sliding the Apexx module out after disconnecting terminals.
Describes removing the Apexx display module from fascia panels.
Explains accessing heater/NTC by dropping the base, and removing the outer door.
Details removing toe kick and side panels for heater/NTC access.
Covers separating the base from the tank for heater/NTC access.
Describes separating the base from the tank by disconnecting J-box wires and hoses.
Guides on removing and installing the heater assembly and NTC.
Details removing and installing the drain pump, including tips for proper installation.
Provides instructions for removing and installing dispensers, with cautions.
Explains changes in condensation tube routing and dispenser types for newer models.
Covers disassembling door latches for integrated models by bending tabs.
Details removing the microswitch and cover, then reassembling the door latch.
Explains the location and function of aqua sensors, and how they affect energy usage.
Discusses water fill assemblies, their function, and common repair issues like microswitch replacement.
Lists models and button sequences to enter test programs for diagnostics.
Details test program and customer error codes for digital displays and Apexx models.
Explains how to use test programs to measure heater and NTC resistances.
Addresses washability, odor, and running issues with causes and suggested actions.
Flowchart to diagnose issues when the control module displays "1", indicating a heating problem.
Flowchart for troubleshooting heater circuits, including current, voltage, and resistance checks.
Flowchart to diagnose and resolve water leaks past dishwasher doors.
Explains PTC motor starters and how to check them.
Provides technical tips and resistance measurements for PTC motor starters.
Discusses nuisance tripping of thermal protectors and solutions using upgraded parts.
Guides on identifying new and original pumps and motor starters for compatibility.
Details how to loosen and replace circulation pump impellers, including temporary fixes.
Explains replacing impellers, emphasizing the black spacer installation.
Shows the appearance of replacement impellers and their ceramic rings.
Lists part number changes for circulation pumps due to upgrades.
Lists part number changes for UC/14 models with water switches.
Summarizes part number changes for circulation pumps and motors for softer bearing models.
Discusses issues with heater relay solder joints and replacing the control module.
Explains replacing a broken front cover instead of the entire control module for button issues.
Covers replacing older control modules with newer ones and the need to change pushbutton pads.
Shows new pushbutton pads and instructions for turning off the end-of-cycle tone.
Compares old and new pushbutton pads and indicator lights for different models.
Discusses using alternative heater assemblies for older models and required component changes.
Explains motor-operated water switches in Apexx/ExactWash models and their components.
Lists part number changes for water switch models compared to older models.
Details sump part improvements made in mid-2003 to enhance draining and prevent jamming.
Provides instructions for replacing dispenser doors that are damaged or pulled off.
Describes top-load dispensers, their mounting, and how rinse-aid dosage is adjusted.
Explains how top-load dispensers measure rinse-aid levels and their dispensing mechanism.
Steps to realign misaligned door latches causing doors not to close properly.
Addresses issues with miswired door latches/harnesses and potential damage to control modules.
Notes the inclusion of larger terminal boxes with covers since September 2003.
Wiring diagram showing module connections and resistance measurement points for SHU43C/53A.
Wiring diagram showing module connections and resistance measurement points for SHX33A/43E/46A/B, SHV46C.
Wiring diagram showing module connections and resistance measurement points for SHU66C, SHI66A.
Wiring diagram showing module connections and resistance measurement points for SHX56B, SHV66A, SHY56/66.
Wiring diagram showing module connections and resistance measurement points for SHV99, SHX99, SHY99.
Wiring diagram showing module connections and resistance measurement points for SHU995X, SHV68 circulation pumps.
Complete wiring diagram for SHU 43C and SHU 53A models.
Complete wiring diagram for SHU 43E, SHU 53E, and SHU 66E models.
Complete wiring diagram for SHX 33A, SHX 46A, SHX 46B, SHV 46C, SHX 43E models.
Complete wiring diagram for SHY 56, SHY 66, SHX 56, and SHV 66 models.
Complete wiring diagram for SHY 99A, SHV 99A, and SHX 99B models.
Explains the warning symbol for serious safety alerts like injury or death.
Lists potential hazards like electric shock and sharp edges.
Warns about electric shock danger and safe practices during repair.
Discusses property damage risks from improper water connections.
States no PC boards are handled in repair, thus no ESD concern.
Confirms no CFCs or refrigerants are used in dishwashers.
States no emissions, notes potential smells from drain connections.
Confirms no carbon monoxide is emitted.
Indicates no government compliance issues.
Lists certifications like UL, Energy Star, and NSF.
Provides key specifications like voltage, amp draw, water pressure, and motor ratings.
Explains model number changes and provides legends for current and older models.
Describes where to find the model and serial number label on the dishwasher.
States the wiring and circuit diagram is folded and located in a slot.
Details limited lifetime warranties for various components like racks, electronics, and rust-through.
Refers to attached installation instructions for location requirements.
Refers to attached installation instructions for electrical requirements.
Refers to attached installation instructions for water/drain requirements.
Refers to attached installation instructions for shipping and packaging removal.
Covers leveling, handle installation, door reversal, and a quick test procedure.
Lists common issues like filter cleaning, smells, door leaks, and damage.
Explains pump usage, flow-through heaters, NTC sensors, and condensation drying.
Details components like circulation pump, drain pump, impeller, heaters, NTC, thermostats, and control modules.
Describes accessing the water valve by removing the toe kick and lists steps for removal.
Shows different water valve part numbers and notes on upgrades and replacement.
Explains how to access the circulation pump by removing the outer door.
Details removing the toe kick and side panels to access circulation pumps.
Describes raising the right side of the tank for circulation pump access.
Provides steps to remove the motor to access the impeller or replace the pump.
Guides on removing and installing the impeller and reassembling the pump.
Explains how to remove control modules by bending console tabs.
Details disassembly for specific SHY/SHU/SHV models with different procedures.
Instructions for removing/installing display modules on SHY56A/66C models.
Covers Apexx control module removal, noting they are base-mounted.
Details removing side panels for Apexx control module access.
Explains raising the tank for Apexx module access.
Shows steps for sliding the Apexx module out after disconnecting terminals.
Describes removing the Apexx display module from fascia panels.
Explains accessing heater/NTC by dropping the base, and removing the outer door.
Details removing toe kick and side panels for heater/NTC access.
Covers separating the base from the tank for heater/NTC access.
Describes separating the base from the tank by disconnecting J-box wires and hoses.
Guides on removing and installing the heater assembly and NTC.
Details removing and installing the drain pump, including tips for proper installation.
Provides instructions for removing and installing dispensers, with cautions.
Explains changes in condensation tube routing and dispenser types for newer models.
Covers disassembling door latches for integrated models by bending tabs.
Details removing the microswitch and cover, then reassembling the door latch.
Explains the location and function of aqua sensors, and how they affect energy usage.
Discusses water fill assemblies, their function, and common repair issues like microswitch replacement.
Lists models and button sequences to enter test programs for diagnostics.
Details test program and customer error codes for digital displays and Apexx models.
Explains how to use test programs to measure heater and NTC resistances.
Addresses washability, odor, and running issues with causes and suggested actions.
Flowchart to diagnose issues when the control module displays "1", indicating a heating problem.
Flowchart for troubleshooting heater circuits, including current, voltage, and resistance checks.
Flowchart to diagnose and resolve water leaks past dishwasher doors.
Explains PTC motor starters and how to check them.
Provides technical tips and resistance measurements for PTC motor starters.
Discusses nuisance tripping of thermal protectors and solutions using upgraded parts.
Guides on identifying new and original pumps and motor starters for compatibility.
Details how to loosen and replace circulation pump impellers, including temporary fixes.
Explains replacing impellers, emphasizing the black spacer installation.
Shows the appearance of replacement impellers and their ceramic rings.
Lists part number changes for circulation pumps due to upgrades.
Lists part number changes for UC/14 models with water switches.
Summarizes part number changes for circulation pumps and motors for softer bearing models.
Discusses issues with heater relay solder joints and replacing the control module.
Explains replacing a broken front cover instead of the entire control module for button issues.
Covers replacing older control modules with newer ones and the need to change pushbutton pads.
Shows new pushbutton pads and instructions for turning off the end-of-cycle tone.
Compares old and new pushbutton pads and indicator lights for different models.
Discusses using alternative heater assemblies for older models and required component changes.
Explains motor-operated water switches in Apexx/ExactWash models and their components.
Lists part number changes for water switch models compared to older models.
Details sump part improvements made in mid-2003 to enhance draining and prevent jamming.
Provides instructions for replacing dispenser doors that are damaged or pulled off.
Describes top-load dispensers, their mounting, and how rinse-aid dosage is adjusted.
Explains how top-load dispensers measure rinse-aid levels and their dispensing mechanism.
Steps to realign misaligned door latches causing doors not to close properly.
Addresses issues with miswired door latches/harnesses and potential damage to control modules.
Notes the inclusion of larger terminal boxes with covers since September 2003.
Wiring diagram showing module connections and resistance measurement points for SHU43C/53A.
Wiring diagram showing module connections and resistance measurement points for SHX33A/43E/46A/B, SHV46C.
Wiring diagram showing module connections and resistance measurement points for SHU66C, SHI66A.
Wiring diagram showing module connections and resistance measurement points for SHX56B, SHV66A, SHY56/66.
Wiring diagram showing module connections and resistance measurement points for SHV99, SHX99, SHY99.
Wiring diagram showing module connections and resistance measurement points for SHU995X, SHV68 circulation pumps.
Complete wiring diagram for SHU 43C and SHU 53A models.
Complete wiring diagram for SHU 43E, SHU 53E, and SHU 66E models.
Complete wiring diagram for SHX 33A, SHX 46A, SHX 46B, SHV 46C, SHX 43E models.
Complete wiring diagram for SHY 56, SHY 66, SHX 56, and SHV 66 models.
Complete wiring diagram for SHY 99A, SHV 99A, and SHX 99B models.
General| Brand | Bosch |
|---|---|
| Model | SHU9955 |
| Category | Dishwasher |
| Language | English |
